A must for your seat restoration project - the perfect seat heating pad.
Those who have restored a Volvo seat would know...

One of the most common problems when restoring a vintage Volvo seat is a not working, worn-out or disintegrated heating element. There are only a handful of things that leave much to be desired in your Volvo, and the seat heater was one of them.

Well, no more. Swedish Car Parts presents the 21st century solution to the problem - a completely new design of the seat heating pad with integrated thermostat and temperature-limiter switch. Unlike the old fragile one with individual wires that would break in time, rendering the while "heated seat" feature unusable, these new pads (designed and built by Swedish Car Parts), will not cause such issues. Here's why:
Much larger area means more heat.

The heating grid is woven in such a way that it could be trimmed to fit. You can merely cut a piece out and there will be no contact loss or shortcut. Needless to say, any broken wire (should that happen, which is unlikely) will not affect the pad's performance.

The wires are completely enclosed within the soft pad. They will not entangle and will always remain a particular pattern, giving the most heat. Less movement - less breakage.

The pad itself has adhesive strips that will hold it firmly to the foam cushion. No slipping, no sliding, no wear and no tear.

The pad could be used either in the cushion, or seatback, or both,
We generously left about 2 feet of the power cable, which is supposed to be trimmed to fit. This allows you to place the pad anywhere in the seat.

Because these pads could be used on any model, the plug-in connector is not supplied. Please reuse the old one.

ATTENTION!
Installing heater pads requires a complete disassembling of your seat. It should be done by a trained professional at proper facilities using correct tools.

Works for: Volvo ALL MODELS

Dash Panel Switch Bulb Only
Volvo 850,
Volvo S70,
Volvo V70,
Volvo 960,
Volvo S90,
12v 40MA 20MM long wire contacts.
These bulbs are installed on the inside of the Interior switches, also on the stereos for any 850, 960 95-97, S/V 90, S/V 70 98-00, C70 98-04.
Used on fog light, headlight, heated seat, central locking, rear fog light switches and stereos.
In order to replace the burned out bulb, the switch has to be removed from the dashboard and white base bulb holder removed from the switch.
You will have to unwrap the ends of the miniature bulbs long wire contacts in order remove it from the base.
Install the new bulb in its place, wrap the wires contact around the base the same way.
Install bulb with the holder in to the switch and switch back in to the dash board.

Dash Panel Switch Bulbs for
Volvo 850,
Volvo 960,
Volvo S70,
12v 30 ma 20mm long wire contacts.
These bulbs are installed on the inside of the Interior switches , also on the stereos for any 850, 960, S70.
Used on fog light, headlight, heated seat, central locking, rear fog light switches and inside of the stereos.
In order to replace the burned out bulb, the switch has to be removed from the dashboard and white base bulb holder removed from the switch.
You will have to unwrap the ends of the miniature bulbs long wire contacts in order remove it from the base.
Install the new bulb in its place, wrap the wires contact around the base the same way.
Install bulb with the holder in to the switch and switch back in to the dash board.
If you are looking for the instructions on the repairs of the Volvo stereo, including the display repairs- we sell the instructions manual for that.

Dash Panel Switch Bulbs Only
Volvo 850,
Volvo S70,
Volvo 960,
Volvo 940,
12v 80MA 20MM long wire contacts.
These bulbs are installed on the inside of the Interior switches, also on the stereos for any 850, S70, 960, 940.
Used on fog light, headlight, heated seat, central locking, rear fog light switches and stereos.
In order to replace the burned out bulb, the switch has to be removed from the dashboard and white base bulb holder removed from the switch.
You will have to unwrap the ends of the miniature bulbs long wire contacts in order remove it from the base.
Install the new bulb in its place, wrap the wires contact around the base the same way.
Install bulb with the holder in to the switch and switch back in to the dash board.
If you are looking for the instructions on the repairs of the Volvo stereo, including the display repairs- we sell the instructions manual for that.

Swedish Car Parts is proud to offer you a complete restoration of your worn-out seats! Your old seat will be completely disassembled, inspected, frame re-manufactured, cushions repaired. Then your seat will be re-upholstered with brand new vinyl seat cover, which is a direct match to the original color and texture to Volvo's vinyl seats for the 240 Series. Your choice of color and stitching pattern, or whether hog rings or zip-ties are used.

Prices vary depending on the extent of the seat wear and the amount of work.
This special offer includes reusing old cushions and refitting the seat with a new cover. You may also opt for:
- Replacing/repairing seat support webbing grid
- Repairing seat frame
- Repairing/replacing lumbar support
- Repairing or replacing seat cushions
If desired, a brand new heating element may be installed either in the cushion, or seatback, or both ($30 labor charge +cost of heating element with thermostat)

Works for: Volvo 240/260 (1975 - 1982 and 1980-1993)
Works for: Volvo 240/260 (1975 - 1982 and 1980-1993)