Volvo VVT Oil Control Valve – Exhaust Camshaft (2.4L & 2.5L T5 Engines)
Part Number: 31216222

This is a new aftermarket Variable Valve Timing (VVT) oil control valve for the exhaust camshaft on select Volvo 2.4L and 2.5L T5 engines. This valve controls oil flow to the camshaft actuator, adjusting timing on the exhaust side to optimize performance, fuel efficiency, and emissions.

Failure of the exhaust VVT solenoid can lead to poor engine operation, loss of power, or fault codes related to camshaft timing.

Common symptoms of a faulty exhaust VVT oil control valve:
Rough idle or stalling

Engine hesitation, especially at low RPM

Decreased fuel efficiency

Check engine light

Diagnostic trouble codes such as:

P0024 – Exhaust Camshaft Timing Over-Advanced (Bank 1)

ECM-641A / ECM-641F – Camshaft control, exhaust

Compatible with the following Volvo models:
C30: 2.4L & 2.5L (2007–2013)

C70: 2.4L & 2.5L (2006–2007)

S40: 2.4L & 2.5L (2004–2012)

S60: 2.5L (2011–2016)

V50: 2.4L & 2.5L (2004–2012)

V60: 2.5L (2014–2016)

XC60: 2.5L (2015–2016)

XC70: 2.5L (2016)

A single head bolt for your Volvo cylinder head (6-cylinder engine). The brand is Victor Reinz. Please select your desired quantity when ordering.

The 6-cylinder engine takes 14 head bolts in total. Please note that the head bolts are torque-to-yield and may only be used once.

Will fit:
S60 3.0L models 2011-2016
S80 3.0L models 2008-2015
V60 3.0L models 2014-2016
V70 3.0L models 2008-2010
XC60 3.0L models 2009-2016
XC70 3.0L models 2009-2015
XC90 3.2L models 2007-2014

A set of 12 (twelve) head bolts for your Volvo cylinder head (5-cylinder engines). The brand is Victor Reinz.

Will fit:
850 2.3L and 2.5L models 1993-1997
C30 2.4L and 2.5L models 2007-2013
C70 2.3L, 2.4L, and 2.5L models 2006-2013
S40 2.4L and 2.5L models 2004-2012
S60 2.3L, 2.4L, and 2.5L models 2011-2016
S70 2.3L, 2.4L, and 2.5L models 1998-2000
S80 2.5L models 2003-2006
V50 2.4L and 2.5L models 2004-2012
V60 2.5L models 2014-2016
V70 2.4L and 2.5L models 1998-2007
V70 XC 2.4L and 2.5L models 1998-2007
XC60 2.5L models 2015-2016
XC70 2.5L models 2016
XC90 2.5L models 2003-2007

These pistons are the standard sized pistons for your Volvo 2.0L 4 cylinder. Please ensure fitment below!

Fits:
For Volvo S60 B4204T 2.0L T4 / T5 Turbo 2014-2020
For Volvo S90 B4204T 2.0L T4 / T5 Turbo 2017-2020
For Volvo V60 B4204T 2.0L T4 / T5 Turbo 2014-2018
For Volvo V90 B4204T 2.0L T4 / T5 Turbo 2016-2020
For Volvo XC40 B4204T 2.0L T4 / T5 Turbo 2018-2020
For Volvo XC60 B4204T 2.0L T4 / T5 Turbo 2014-2020
For Volvo XC70 B4204T 2.0L T4 / T5 Turbo 2014-2016
For Volvo XC90 B4204T 2.0L T4 / T5 Turbo 2016-2020

Volvo VVT Camshaft Exhaust Control Solenoid – Part Number: 31216281
Fits 3.0L / 3.2L I6 / T6 Engines

This is a brand-new aftermarket camshaft exhaust control solenoid designed for the Variable Valve Timing (VVT) system in select 6-cylinder Volvo engines. The solenoid precisely regulates oil flow to the camshaft actuator, adjusting valve timing for optimal performance and fuel efficiency.

When this solenoid begins to fail or becomes clogged with debris, it can cause poor engine performance and trigger fault codes, particularly related to camshaft timing.

Common issues caused by a failing VVT exhaust solenoid:
Check engine light (CEL)

Rough idle or stalling

Hesitation during acceleration

Decreased fuel efficiency

VVT system-related fault codes, including:

P0014 – Exhaust Camshaft Position Timing Over-Advanced

P0024 – Exhaust Camshaft Position Timing Over-Advanced (Bank 2)

ECM-640F / ECM-641F – Camshaft control, exhaust

Direct fit for the following Volvo models:
S60: 3.0L (2011–2016)

S80: 3.0L / 3.2L (2007–2015)

V60: 3.0L (2014–2016)

V70: 3.2L (2008–2010)

XC60: 3.0L / 3.2L (2009–2016)

XC70: 3.0L / 3.2L (2008–2015)

XC90: 3.2L (2007–2014)

Volvo VVT Oil Control Valve – Intake Camshaft (2.4L & 2.5L T5 Engines)
Part Number: 31216221

This is a new aftermarket Variable Valve Timing (VVT) oil control valve for the intake camshaft on select 2.4L and 2.5L T5 Volvo engines. The valve plays a key role in regulating oil pressure to adjust intake camshaft timing for improved engine efficiency and performance.

Over time, the oil control valve can become sluggish or clogged, leading to incorrect camshaft timing, reduced power, or increased emissions.

Common symptoms of a faulty intake VVT oil control valve:
Engine hesitation or rough idle

Loss of low-end torque

Poor fuel economy

Illuminated check engine light

Trouble codes such as:

P0010 – A Camshaft Position Actuator Circuit (Bank 1 Intake)

P0011 – A Camshaft Position Timing Over-Advanced (Bank 1 Intake)

ECM-640A – Camshaft position, intake

Direct fit for the following Volvo models:
C30: 2.4L & 2.5L (2007–2013)

C70: 2.4L & 2.5L (2006–2007)

S40: 2.4L & 2.5L (2004–2012)

S60: 2.5L (2011–2016)

V50: 2.4L & 2.5L (2004–2012)

V60: 2.5L (2014–2016)

XC60: 2.5L (2015–2016)

XC70: 2.5L (2016)

Volvo VVT Camshaft Intake Control Solenoid for 3.0L 3.2L I6 T6 S60, S80, V60, V70, XC70, XC90 Variable Valve Timing
PART NUMBER: 31251224

This is a new aftermarket replacement camshaft intake control solenoid for the Variable Valve Timing (VVT) system on select Volvo 3.0L and 3.2L inline-6 engines. The solenoid regulates oil flow to adjust the intake camshaft timing, optimizing engine performance, efficiency, and emissions.

Possible Issues:
A faulty intake camshaft control solenoid may cause improper valve timing, resulting in:

Engine hesitation or rough idle

Reduced fuel efficiency

Decreased engine power and responsiveness

Illumination of the Check Engine Light (CEL) with related timing fault codes such as P0010, P0011, or P0013

Difficulty passing emissions tests

Fits:

S60 3.0L models 2011–2016

S80 3.0L and 3.2L models 2007–2015

V60 3.0L models 2014–2016

V70 3.2L models 2008–2010

XC60 3.0L and 3.2L models 2009–2016

XC70 3.0L and 3.2L models 2008–2015

XC90 3.2L models 2007–2014