A must for your seat restoration project - the perfect seat heating pad.
Those who have restored a Volvo seat would know...

One of the most common problems when restoring a vintage Volvo seat is a not working, worn-out or disintegrated heating element. There are only a handful of things that leave much to be desired in your Volvo, and the seat heater was one of them.

Well, no more. Swedish Car Parts presents the 21st century solution to the problem - a completely new design of the seat heating pad with integrated thermostat and temperature-limiter switch. Unlike the old fragile one with individual wires that would break in time, rendering the while "heated seat" feature unusable, these new pads (designed and built by Swedish Car Parts), will not cause such issues. Here's why:
Much larger area means more heat.

The heating grid is woven in such a way that it could be trimmed to fit. You can merely cut a piece out and there will be no contact loss or shortcut. Needless to say, any broken wire (should that happen, which is unlikely) will not affect the pad's performance.

The wires are completely enclosed within the soft pad. They will not entangle and will always remain a particular pattern, giving the most heat. Less movement - less breakage.

The pad itself has adhesive strips that will hold it firmly to the foam cushion. No slipping, no sliding, no wear and no tear.

The pad could be used either in the cushion, or seatback, or both,
We generously left about 2 feet of the power cable, which is supposed to be trimmed to fit. This allows you to place the pad anywhere in the seat.

Because these pads could be used on any model, the plug-in connector is not supplied. Please reuse the old one.

ATTENTION!
Installing heater pads requires a complete disassembling of your seat. It should be done by a trained professional at proper facilities using correct tools.

Works for: Volvo ALL MODELS

Seat back recline control knob wheel . Beige color . Commonly destroyed because of its age and or missing part at the pivot point of the seat back bottom . When the knob is installed in its place you are able to adjust the tilt angle of the of the seat back. The seat back is adjustable - all that you need is to install the knob in its place.
This seat recline control knob will fit all the Volvo 240 models with manual control seats. It will fit all the 700 and 900 series seats with manual controls as well In some cases large dished spring washer is needed to secure the knob in its place. The washer is available on our web site . Please search for the part number LW13179

Seat back recline control knob wheel . Blue color . Commonly destroyed because of its age and or missing part at the pivot point of the seat back bottom . When the knob is installed in its place you are able to adjust the tilt angle of the of the seat back. The seat back is adjustable - all that you need is to install the knob in its place.
This seat recline control knob will fit all the Volvo 240 models with manual control seats. It will fit all the 700 and 900 series seats with manual controls as well In some cases large dished spring washer is needed to secure the knob in its place. The washer is available on our web site . Please search for the part number LW13179

Seat back recline control knob wheel . Commonly destroyed and missing part at the pivot point of the seat bottom . When the knob is installed in its place you are able to adjust the tilt angle of the of the seat back. The seat back is adjustable - all that you need is to install the knob in its place.
This seat recline control knob will fit all the Volvo 240 models with manual control seats. It will fit all the 700 and 900 series seats with manual controls as well In some cases large dished spring washer is needed to secure the knob in its place. The washer is available on our web site . Please search for the part number LW13179