SANDWICH TYPE GASKET VOLVO 240 BETWEEN EXHAUST HEADER FRONT PIPE AND EXHAUST MANIFOLD . Just like the original one , softer material is places between metal outer shields. exhaust bore lip is rolled over . This will provide at least 30 years of service when installed correctly
Fits 240 244 245 sedan or station wagon from 1975 through 1993.
This set works with the floating flange or fixed flange pipe connections

hardware set -3 bolts and 3 nuts for proper assembly of your exhaust system . With these you will be able to attach your front header pipe to the catalytic convertor. These are SHOULDER head bolts and SHOULDER head nuts. Just like the original ones , that were once installed on your legendary volvo 240 series.
Fits 240 244 245 sedan or station wagon from 1975 through 1993.
This set works with the floating flange or fixed flange pipe connections

Exhaust manifold stud with nut . Manifold is not included .Removal of your old stripped out exhaust manifold stud will require heating the exhaust manifold with Acetylene torch or with map gas torch to a cherry red color. One should be extremely careful. and have adequate protection along with a bucket of water -just in case things get out of hand. Please be careful!
Having difficulties? we can remove and install new studs onto your manifold
$50.00 per stud , installed . Same day service.

Fits 240 244 245 sedan or station wagon from 1975 through 1993.
This set works with the floating flange or fixed flange pipe connections

FRONT stainless steel exhaust header pipe
for Volvos with EGR (Exhaust Gas Recirculation) system.
This not have an oxygen (O2) sensor port.
34.5" length from front flange to rear flange.
Entirely (weld beads, flanges etc) made from 304 stainless steel, tig welded and polished. Floating Flange which is precision plasma cut from solid stainless steel.
This will be the last header pipe your Volvo 240 will ever need.
Covered with lifetime warranty.
Exact copies from the original Volvo only made in stainless steel, mandrel bent (filled with sand to prevent collapsing and corked at the ends to keep the sand in place).
Fits 240 244 245 sedan or station wagon from 1989 through 1993.
This item has a floating connection flange to the catalytic convertor.

This Exhaust pipe and flanges are made from stainless steel, TIG welded and polished.
Every bracket is made from stainless Steel. Every weld bead is made with stainless steel.
This exhaust pipe is covered with lifetime warranty
Fits Volvo 240 244 245 sedan or station wagon
from 1980 through 1993
This front pipe has a welded connection flange to the catalytic convertor. There are different types . Some models use FLOATING flange- the type that moves on the end of the pipe. This one is welded.
Will NOT fit cars with EGR systems.

This front exhaust pipe will fit Volvo 240 244 245 sedan or wagon from 1980 through 1993. This pipe is designed to fit Volvo models that are not equipped with E.G.R ( exhaust Gas re-circulation) systems.

This front pipe is assembled with a floating rear flange - connection flange to the catalytic convertor.

This header pipe does not have an oxygen (O2) sensor port, and will fit 240 models with 02 port on the front manifold.

36.5" length from front flange to rear flange.

Entirely (weld beads, flanges etc.) made from 304 stainless steel, tig welded and polished.

Floating rear Flange (attaches to catalytic convertor) is precision plasma cut from solid stainless steel.

This will be the last header pipe your Volvo 240 will ever need.
Covered with lifetime warranty. Precision made, design and layout copied from the original Volvo front pipe. Made from stainless steel, manufactured using special equipment and tooling.

You visited your friendly muffler shop not that long ago, and now your car sounds like a stock car again?
If you don't want to your car to sound like a drag racer while driving to your destination, you should choose this stainless steel exhaust system!

This is NOT high performance noisy exhaust, but a well thought after duplication of an original exhaust system from a legendary car maker;
a good copy. Only terminated in Stainless steel. So it does not rust....

You will receive 2 pipes, 4 clamps, and 2 mufflers, in other words, everything behind the catalytic convertor. Entirely (brackets, weld beads, clamps etc.) made from 304 stainless steel, TIG welded and polished. Covered with a lifetime warranty. Over-the-axle design, and all the hangers and bracket mounts are identical to the original Volvo exhaust system. The front silencer and the rear muffler are exact copies from the original Volvo only made in stainless steel. Exhaust pipes are CNC mandrel bent

Fits 240 244 245 sedan or station wagon from 1980 through 1993.

If you want a racing muffler, we don't sell them . We suggest that you should think twice about that anyway! Install a quality exhaust and be happy. The people in your neighborhood will not know when you come and go anymore... you know they are saying.... There goes Mike... Mike's home... come on Mike it's 2 am...