Interior door panel lock release handle guide casing BLUE LEFT HAND/ DRIVER'S SIDE for Volvo 240 all modifications. Fits front or rear doors

Interior door panel lock release handle guide casing BLACK RIGHT HAND/ PASSENGER'S SIDE for Volvo 240 all modifications. Fits front or rear doors

This cap is installed into the mounting screw opening of the door handle
this cab is BEIGE color
.This is a reproduction part. You can purchase one here while the original part is missing from your door handle.
We added a much-needed improvement to the cylindrical portion of the cap. to ensure that this reproduction part has a better chance of remaining in its place.
THIS CAP COVERS DOOR HANDLE MOUNTING SCREW HOLE
FRONT OR REAR DOORS.
SUITABLE FOR VOLVO P1800ES ,140, 164, 240,260
REPRODUCTION PART WITH IMPROVEMENTS
You will receive 1 cap with your purchase. Please order accordingly.

These are reproduction door pockets. Made from superior material. 100% exact match. Fits all Volvo 240 models from 1982 through 1993. Color is exact match. Also available in Beige, Blue, and Brown.

Interior door panel lock release handle guide casing BLACK LEFT HAND/ DRIVER'S SIDE for Volvo 240 all modifications. Fits front or rear doors

Interior door lock pull door knob. For Volvo 240 all years .Blue color . ABS material
You will receive 1 part . Please order accordingly
BLUE color

Interior door lock pull door knob. For Volvo 240 all years .Black color . ABS material
You will receive 1 part . Please order accordingly
black color

Interior door lock pull door knob. For Volvo 240 all years .Beige color . ABS material
You will receive 1 part . Please order accordingly
beige color

Interior door lock release handle blue color for Volvo 240 all modifications. Fits front or rear doors . You will receive 1 lever handle. Order accordingly.

Interior door panel lock release handle guide casing beige RIGHT HAND/ PASSENGER'S SIDE for Volvo 240 all modifications. Fits front or rear doors

Interior door lock release handle beige for Volvo 240 all modifications. Fits front or rear doors . You will receive 1 lever handle. Order accordingly.

Interior door lock release handle black color for Volvo 240 all modifications. Fits front or rear doors . You will receive 1 lever handle. Order accordingly.

These are reproduction door pockets. Made from superior material. 100% exact match. Fits all Volvo 240 models from 1982 through 1993. Color is exact match. Also available in Brown, Blue, and Black.

These are reproduction door pockets. Made from superior material. 100% exact match. Fits all Volvo 240 models from 1982 through 1993. Color is exact match. Also available in Beige, Blue, and Brown.

Replacement interior panel board mounting clip with larger retainer head that can be installed on badly worn out door panels of your Volvo 240 sedan and station wagon.

When the interior door panel is removed from the car to gain access to internal components on a 30 year old Volvo 240, the small plastic mounting clips will crumble in your hands or split in two parts and can no longer be used for their purpose. Original replacement mounting clips are still available from Volvo.

The trouble comes in - when in the process of pulling a dried out panel away from the door , the small head of the plastic retainer rips pressed particle board of the door panel and provides a nice hole about the size of its retainer ,and the original type retainer clip becomes useless.

This type of situation calls for a custom retainer clip from Swedish Car Parts , with improved design ! Our custom designed larger retainer will work in place of the original part, and will hold the door panel in place .

Upper retainer head of our improved clip is shaped in the form of a letter G and can be installed into existing mounting hole of the pressed particle board door decorative interior panel easily.
By using this improved type of mounting clip you will save time and make your door panel installation a pleasant experience.

This clip is yellow in color and will fit many Volvo 240 series and 140 series. If you are looking for improved design Pink color or Black color muting clips - please look on our web site as we have them in the interior parts sections .

Set of 2 reproduction combination speakers with tweeters, 4 Ohm, 20 watt. These speakers have been custom manufactured to replicate original volvo low profile speakers . We requested the manufacturer to add tweeters into the speakers. These have correct mounting hole spacing to fit the original style mounting bracket, using all 4 mounting bolts for proper sound delivery. The original speaker covers will cover these speakers neatly , and without any modifications. It is time to install properly made speakers into your front doors and restore your Volvo's original appearance.
Mounting brackets are made to fit front doors and can be neatly installed onto rear window shelf with interior matching covers
We manufacture custom color matched speaker muting brackets and speaker covers that resemble original equipment and that will match your volvo 240 interior . This product offer consists of 2 speakers and 2 mounting brackets with color matching covers.

This cap is installed into the mounting screw opening of the door handle
this cab is BLUE color
.This is a reproduction part. You can purchase one here while the original part is missing from your door handle.
We added a much-needed improvement to the cylindrical portion of the cap. to ensure that this reproduction part has a better chance of remaining in its place.
THIS CAP COVERS DOOR HANDLE MOUNTING SCREW HOLE
FRONT OR REAR DOORS.
SUITABLE FOR VOLVO P1800ES ,140, 164, 240,260
REPRODUCTION PART WITH IMPROVEMENTS
You will receive 1 cap with your purchase. Please order accordingly.

This cap is installed into the mounting screw opening of the door handle
this cab is BLACK color
.This is a reproduction part. You can purchase one here while the original part is missing from your door handle.
We added a much-needed improvement to the cylindrical portion of the cap. to ensure that this reproduction part has a better chance of remaining in its place.
THIS CAP COVERS DOOR HANDLE MOUNTING SCREW HOLE
FRONT OR REAR DOORS.
SUITABLE FOR VOLVO P1800ES ,140, 164, 240,260
REPRODUCTION PART WITH IMPROVEMENTS
You will receive 1 cap with your purchase. Please order accordingly.

Interior door trim for the pull-open door handle for Volvo 240 all modifications.
BLUE color

Interior door lock trim ring bushing for the push - pull door knob. For Volvo 240 all years . Picture with blue outline shows area of the improvement we made to the part for better functionality . ABS material
You will receive 1 part . Please order accordingly
BEIGE color AS SHOWN

Interior door lock trim ring bushing for the push - pull door knob. For Volvo 240 all years . Picture with blue outline shows area of the improvement we made to the part for better functionality . ABS material
You will receive 1 part . Please order accordingly
BLACK color

Interior door lock trim ring bushing for the push - pull door knob. For Volvo 240 all years . Picture with blue outline shows area of the improvement we made to the part for better functionality . ABS material
You will receive 1 part . Please order accordingly, as you have FOUR doors most likely.
BLUE color

Front interior door panel repair kit bottom portion Will fit all models Volvo 240 with 4 side doors Will not f Volvo 242
This panel is laser cut to precise dimensions. Bottom area of the interior panel is found to be commonly damaged by moisture. Sample is shown in the photos on the left.

To repair a decayed lower backing panel with our repair kit ,the door panel should be removed from the vehicle . Cut out and remove the decayed portion. Using gentle heat from the hairdryer to loosen up and remove remaining of decayed paperboard from the upholstery trim surrounding this the decayed area. . Fit our repair plate into position, measure and cut a straight line on your existing door panel so that the edges will mate up and secure both parts using fiber reinforced craft tape or duct tape in place , You may want to use a Fiberglass cloth and epoxy resin to joint both parts together for professional results, while hot glue will work just fine .The original upholstery should be gently stretched in place over the new portion of the door panel, and secured with masking tape, before gluing the upholstery to the new panel. We recommend using Elmer's rubber cement to attach upholstery. It is easy to work with and it is forgiving if a mistake is made . We are including a set 8 panel mounting clips of different colors to complete the installation procedure

This kit contains everything needed to install Volvo 240 door pockets - two screws with washers, two spacers, and three clips. When you get brand new door pockets, don't forget this complete hardware kit. you will need one per door.

This kit contains everything needed to install Volvo 240 door pockets - two screws with washers, two spacers, and three clips. When you get brand new door pockets, don't forget this complete hardware kit. you will need one per door.

Replacement interior panel board mounting clip with larger retainer head that can be installed on badly worn out door panels of your Volvo 240 sedan and station wagon.

When the interior door panel is removed from the car to gain axes to the internal components on the 30 year old Volvo 240, the small plastic mounting clips will crumble in your hands or split in two parts and can no longer be used for their purpose. Original replacement mounting clips are still available from Volvo.

The trouble comes in - when in the process of pulling a dried out panel away from the door , the small head of the plastic retainer rips pressed particle board of the door panel and provides a nice hole about the size of its retainer ,and the original type retainer clip becomes useless.

This type of situation calls for a custom retainer clip from Swedish Car Parts , with improved design ! Our custom designed larger retainer will work in place of the original part, and will hold the door panel in place .

Upper retainer head of our improved clip is shaped in the form of a letter G and can be installed into existing mouthing hole of the pressed particle board door decorative interior panel easily.
By using improved type of mounting clip you will save time and make your door panel installation a pleasant experience.

this clip is black in color and will fit many Volvo 240 series and 140 series. If you are looking for improved design Pink color or Yellow color muting clips - please look on our web site as we have them in the interior parts sections .

These are reproduction door pockets, made from superior material. 100% exact match. Fits all Volvo 240 models from 1982 through 1993. Color is Exact match.
Also available in Beige, Blue, and Black.

Interior door panel lock release handle guide casing blue RIGHT HAND/ PASSENGER'S SIDE for Volvo 240 all modifications. Fits front or rear doors

Replacement interior panel board for rear hatch door for volvo 240 245 station wagon
This is a laser cut backing plate particle board panel onto which you can transfer the upholstery cover from your old interior pane.
As a rule the original interior panel of the hatch door of your Volvo 240 station wagon can no longer stay in place ,and have tendency to fall on your head as you walk under the open hatch door.

We are offering a laser board that is exactly same in dimensions as your old one. All that have to be done is to transfer upholstery cover that is held with shot staples and install panel back in its place
Plastic mounting clips have to be carefully re used. It is a good practice to warm them up with a hair drier prior to removal - installation. This makes material of the clip more pliable

Interior door panel lock release handle guide casing beige lh for Volvo 240 all modifications. Fits front or rear doors.

Interior door trim for the pull-open door handle for Volvo 240 all modifications.

TAN or BEIGE COLOR - TO MATCH THE INTERIOR front speaker mounting bracket and speaker cover grille kit for Volvo 240 all modifications. Kit has 2 parts 1384636 speaker grille and 1384655 mounting bracket

Window crank handle for non-power windows for Volvo 240 all modifications. Universal part for sedans or wagons, left or right, front or rear doors. Complete with decorative snap-on trim piece.

Interior door trim for the pull-open door handle for Volvo 240 all modifications.

Set of 2 reproduction combination rear speakers with tweeters, 4 Ohm, 20 watt . 2 mounting brackets and 2 covers
Mounting brackets are made to fit neatly onto rear window shelf with interior matching covers. These speakers have been custom manufactured to replicate original size Volvo low profile speakers . It is time to install properly made speakers into the rear shelf and keep your Volvo's original appearance.

We manufacture custom color matched speaker muting brackets and speaker covers that resemble original equipment and that will match your volvo 240 interior . This product offer consists of 2 speakers and 2 mounting brackets with color matching covers.

Set of 2 reproduction combination speakers with tweeters, 4 Ohm, 20 watt. These speakers have been custom manufactured to replicate original volvo low profile speakers . We requested the manufacturer to add tweeters into the speakers. These have correct mounting hole spacing to fit the original style mounting bracket, using all 4 mounting bolts for proper sound delivery. The original speaker covers will cover these speakers neatly , and without any modifications. It is time to install properly made speakers into your front doors and restore your Volvo's original appearance.
Mounting brackets are made to fit front doors and can be neatly installed onto rear window shelf with interior matching covers
We manufacture custom color matched speaker muting brackets and speaker covers that resemble original equipment and that will match your volvo 240 interior . This product offer consists of 2 speakers and 2 mounting brackets with color matching covers.

front speaker mounting bracket and speaker cover kit for Volvo 240 all modifications. Kit has 2 parts 1384636 speaker grille and 1384655 mounting bracket

BLUE COLOR - TO MATCH THE INTERIOR front speaker mounting bracket and speaker cover grille kit for volvo 240 all modifications. Kit has 2 parts 1384636 speaker grille and 1384655 mounting bracket