Available exclusively from Swedish Car Parts, and our stocking dealers!

This BLACK color third brake light cover will fit all Volvo 240 245 station wagons from 1991 through 1993

This cover fits the model where the rear window is glued in place with urethane and is even with the outside surface of the hatch door.
These cars have an extra plastic trim on the inside perimeter of the window.
.
New aftermarket reproduction part made by Swedish Car Parts, Inc

This cover is installed onto the third brake light that is mounted at the bottom edge of the rear window.

You finally will be able to remove the duck tape that is covering the third brake light and stop squinting every time you have to stop!

Pair of complete tail light assemblies for your Volvo 240 Series from 1986 through 1993
all clear lenses as shown, including circuit boards, gaskets, bulbs, and bulb holders.
Clear lenses are installed at the factory, assemblies are hot plate welded by industrial robot.
Made in Estonia By Alvo Industries for Swedish Car Parts Inc.
you will receive one pair , left and right side

Available exclusively from Swedish Car Parts, and our stocking dealers throughout the world.

This BLACK third brake light cover will fit all Volvo 240 245 *station wagons* from 1982 through 1990

**This cover fit the models where the rear window is installed in place with a rubber seal and is recessed into the rear hatch door outside surface. These cars do not have extra plastic trim on the inside perimeter of the window**
.
New aftermarket reproduction part made by Swedish Car Parts, Inc

This cover is installed onto the third brake light that is mounted at the bottom edge of the rear window. You finally will be able to remove the duck tape that was covering the third brake light and stop squinting every time you have to stop.

Available exclusively from Swedish Car Parts, this BLACK third brake light cover will fit all Volvo *WAGONS* models 740 745 940 960 V90 1983 through 1998
.
This is a new aftermarket reproduction part made by Swedish Car Parts, Inc
This cover is installed onto the third brake light that is mounted at the bottom edge of the rear window.

You finally will be able to remove the duck tape that was covering the third brake light and stop squinting every time you have to stop.

A set of complete tail light assemblies for your Volvo 240 Series from 1986 through 1993
Complete with circuit boards, gaskets, bulbs, and bulb holders.
Clear lenses are installed at the factory,
and all assemblies are hot plate-welded by industrial robot.
Made in Estonia By Alvo Industries for Swedish Car Parts Inc.

Available exclusively from Swedish Car Parts, the rear windshield BLACK interior Third Brake Light Cover installed on the rear window behind the rear seat at the bottom edge of the rear windshield
Works for Volvo 240 sedans 1986-1993.
New aftermarket part, Swedish Car Parts' own production. You will love the way your car looks after installing this much needed part!

Tail light assembly with black center molding for
Volvo sedan 240 DL/244 GL/Turbo,1985
Volvo sedan 240 1986-1993
OPTICAL UNIT ONLY
(simply reuse old electrical components and the gasket).
Right side/Passenger side.

Available exclusively from Swedish Car Parts, the rear BEIGE interior Third Brake Light Cover. This cover is installed at the rear window behind the rear seat at the bottom edge of the rear windshield
Works for Volvo 240 sedans 1986-1993.
New aftermarket part, Swedish Car Parts' own production. You will love the way your car looks after installing this much needed part!

Tail light OPTICAL UNIT ONLY with black center molding for
Volvo sedan 240 DL/244 GL/Turbo,1985
Volvo sedan 240 1986-1993
OPTICAL UNIT ONLY
(simply reuse old electrical components and the gasket)
Left side/Driver side

Tail light assembly with six light panels for
Volvo sedan 242 1979-1984,
Volvo sedan 262 1979-1984,
Volvo sedan 264GL 1979-1984,
Black Center Molding,
Right side/Passenger side.
Taillight has 2 of the 5-watt bulb in the bottom row.
Sold as complete assembly that includes bulbs, bulb holders, circuit board and gasket.

Tail light assembly with six light panels for
Volvo sedan 242 1979-1984,
Volvo sedan 262 1979-1984,
Volvo sedan 264GL1979-1984,
Black Center Molding,
Left side/Driver side.
Taillight has 2 of the 5-watt bulb in the bottom row.
Sold as complete assembly that includes bulbs, bulb holders, circuit board and gasket.

Tail light complete assembly with chrome center molding for
Volvo sedan 240 DL/244 GL/Turbo, 1985
Volvo sedan 240 1986-1993.
Right side/Passenger side.
Includes bulbs, bulb holders, circuit board and gasket.

Tail light optical unit housing ONLY with chrome center molding for,
Volvo sedan 240 DL/244 GL/Turbo, 1985
Volvo sedan 240 1986-1993
(simply reuse old electrical components and the gasket),
Right side/Passenger side.

Tail light complete assembly with chrome center molding for
Volvo sedan 240 DL/244 GL/Turbo,1985
Volvo sedan 240 1986-1993,
Left side/Driver side.
Includes bulbs, bulb holders, circuit board and gasket.

Tail light optical unit ONLY with chrome center molding for
Volvo sedan 240 DL/244 GL/Turbo,1985
Volvo sedan 240 1986-1993
OPTICAL unit ONLY
simply reuse old electrical components and the gasket)
Left side/Driver side

Tail light lens with chrome rim for Hella or CIBIE* tail light
Volvo sedan 140 1973-1978,
Volvo sedan 160 1973-1978,
Volvo sedan 240 1973-1978,
Right side/Passenger side.
*This lens is also adaptable to CIBIE tail light housing!
Hole for one of the securing screw has to be drilled in the plastic frame of the taillight housing to match the hole patterns of the lens.

Tail light lens with chrome rim for Hella or CIBIE* tail light
Volvo sedan 140 1973-1978,
Volvo sedan 160 1973-1978,
Volvo sedan 240 1973-1978,
Left side/Driver side.
*This lens is also adaptable to CIBIE tail light housing!
Hole for one of the securing screw has to be drilled in the plastic frame of the taillight housing to match the hole patterns of the lens.

Tail light assembly with six light panels for
Volvo sedan 242 1979-1984,
Volvo sedan 262 1979-1984,
Volvo sedan 264GL 1979-1984,
Chrome Center Molding,
Left side/Driver side.
Taillight has 2 of the 5-watt bulb in the bottom row.
Sold as complete assembly that includes bulbs, bulb holders, circuit board and gasket.

Tail light assembly with six light panels for
Volvo sedan 242 1979-1984,
Volvo sedan 262 1979-1984,
Volvo sedan 264GL 1979-1984
Chrome Center Molding,
Right side/Passenger side.
Taillight has 2 of the 5-watt bulb in the bottom row.
Sold as complete assembly that includes bulbs, bulb holders, circuit board and gasket.

Tail light assembly with black center molding for
Volvo sedan 240 DL/244 GL/Turbo,1985
Volvo sedan 240 1986-1993.
Right side/Passenger side.
Includes bulb holders,bulbs, circuit board and gasket.

Tail light assembly with black center molding for
Volvo sedan 240 DL/244 GL/Turbo,1985
Volvo sedan 240 1986-1993,
Left side/Driver side.
Includes bulb holders,bulbs, circuit board and gasket.

A set of complete tail light assemblies for your Volvo 240 Series from 1986 through 1993
Complete with circuit boards, gaskets, bulbs, and bulb holders.
Clear turn signal lenses are installed at the factory,
and all assemblies are hot plate-welded by industrial robot.
Made in Estonia By Alvo Industries for Swedish Car Parts Inc.